LCDB v4.0 (Deprecated)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17984
1326
Added
27 Jun 2014

This dataset was first added to LRIS Portal on 27 Jun 2014.

The New Zealand Land Cover Database (LCDB) is a multi-temporal digital thematic map of land cover and land use. Land cover at each of four periods; summer 1996/97, summer 2001/02, summer 2008/09, and summer 20012/13, is both delineated and classified. The land cover classification evolved over the first three periods but compatibility has been maintained. The current version, LCDB v4 (and its predecessor LCDB v3), contains 33 classes. The classification used in LCDB v3 and v4 can be found in the document LCDB2-3CorrelationTable.pdf along with the correlation from the classification used in the earlier version (LCDB v2). This document is available as an attachment to this dataset in the LRIS portal (lris.scinfo.org.nz/), and on the LCDB project site (www.lcdb.scinfo.org.nz). The LCDB was designed to be compatible in scale and accuracy with Land Information New Zealand’s 1:50,000 topographic database. The LCDB is intended for use in areas such as state of environmental monitoring, forest and shrub inventory, biodiversity assessment, trend analysis and infrastructure planning. LCDB v4.0 was released in June 2014 and includes non-temporal edits to the 1996/97, 2001/02, and 2008/09 time periods along with new mapping of change up to the summer 2012/13 period. A change layer, “LCDB v4.0 change” is available to indicate both non-temporal and temporal changes made between LCDB v3.3 and LVCDB v4.0, The non-temporal changes include error in earlier mapping. An “authority” attribute is also available in this layer acknowledging the source of the latest mapping of both non-temporal and temporal change. The Chatham Islands, which were available as part of LCDB-2 on a different map projection, have not yet been re-mapped in LCDB v3.0, v3.3, or v4.0.The data is referenced to the New Zealand Transverse Mercator 2000 projection (NZTM2000) which uses the NZ Geodetic Datum 2000 (NZGD2000). Errors in the data due to misclassification (not changes since mapping) or poor delineation can be reported to Landcare Research for inclusion in the next release using the online feedback mechanisms in lris.scinfo.org.nz/.

Layer ID 48412
Data type Vector polygon
Feature count 479353
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Christchurch 15m DEM - Height Corrected

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11942
380
Added
25 Feb 2011

This dataset was first added to LRIS Portal on 25 Feb 2011.

A 15 metre resolution, floating point precision, elevation grid generated from the LINZ 1:50,000 scale Topographic data layers (20m contours, spot heights, lake shorelines and coastline) using Landcare Research's in-house interpolation software.

This DEM was originally produced in New Zealand Map Grid (NZMG) projection with elevation in terms of the Infomap 260 chart datum (Mean High Water Spring).

It has been transformed so that the heights are floating point ellipsoidal heights with respect to the GRS80 ellipsoid; this is the standard ellipsoid for the NZTM projection.

Layer ID 48187
Data type Grid
Resolution 15.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Soil map for the Upper Plains and Downs of Canterbury

13986
239
Updated
18 Oct 2011

This dataset was last updated on LRIS Portal on 18 Oct 2011.

This database describes the soils of the pastoral and cropping land of Canterbury, from the Kowhai River in the north to the Rangitata River in the south, but not including Banks Peninsula. The original survey was mapped as a reconnaissance soil survey at 2 miles to the inch. These original soil boundaries have been very substantially revised and recompiled onto 1:50,000 scale topographic base by T.H. Webb in the 1990s and again in the 2000s.

Layer ID 48157
Data type Vector polygon
Feature count 2710
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

FSL Soil Drainage Class

4993
507
Added
04 Jun 2010

This dataset was first added to LRIS Portal on 04 Jun 2010.

The New Zealand Fundamental Soil Layer originates from a relational join of features from two databases: the New Zealand Land Resource Inventory (NZLRI), and the National Soils Database (NSD). The NZLRI is a national polygon database of physical land resource information, including a soil unit. Soil is one in an inventory of five physical factors (including rock, slope, erosion, and vegetation) delineated by physiographic polygons at approximately 1:50,000 scale. The NSD is a point database of soil physical, chemical, and mineralogical characteristics for over 1500 soil profiles nationally. A relational join between the NZLRI dominant soil and derivative tables from the NSD was the means by which 14 important soil attributes were attached to the NZLRI polygons. Some if these attributes originate from exact matches with NSD records, while others derive from matches to similar soils or professional estimates. This layer contains attributes relating to soil drainage. Soil drainage is described as a class. Drainage classes are assessed using criteria of soil depth and duration of water tables inferred from soil colours and mottles. Drainage classes used here are the same as those used in the NZ Soil Classification (Hewitt 1993), and outlined by Milne et al. (1995).

Layer ID 48104
Data type Vector polygon
Feature count 107298
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LCDB v3.0 (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13869
798
Added
26 Jun 2012

This dataset was first added to LRIS Portal on 26 Jun 2012.

DEPRECATED - THIS VERSION WAS SUPERCEDED FIRST BY VERSION 3.3 AND MORE RECENTLY BY VERSION 4.0 now available at lris.scinfo.org.nz/layer/412-lcdb-v40-land-cover-d...

This database is a thematic classification of land cover and land use classes. The current version 3 contains 33 classes designed to be compatible with earlier versions. The polygon features contain a code and boundary representing the land cover type at each of three periods; summer 1996/97, summer 2001/02, and summer 2008/09. The data set was designed to be compatible in scale and accuracy with Land Information New Zealand’s 1:50,000 topographic database. The land cover database is intended to be used in areas such as state of environmental monitoring, forest and shrubland inventory, biodiversity assessment, trend analysis and infrastructure planning.

The list of classes used in land cover database v3.0 can be found in the document LCDB2-3 Correlation Table along with the mapping from the class set used in the previous version (land cover database 2). This document is available as an attachment to this dataset (see below), and on the land cover database project site (www.lcdb.scinfo.org.nz).

The land cover database v3.0 was released in July 2012 and includes non-temporal edits to the summer 1996/97, summer 2001/02 time periods along with the new summer 2008/09 period. A change layer, “LCDB v3.0 change” (lris.scinfo.org.nz/layer/308-lcdb-v30-change) is available to indicate both non-temporal and temporal changes made between land cover database 2 and land cover database v3.0, The non-temporal changes include errors in the earlier mappings, step artefact removal, and coastline adjustments. An “authority” attribute is also available in this layer indicating the source of the change for both non-temporal and temporal changes mapped.

Funding is from the Ministry for Science and Innovation under contract CO9X1101, which was contributed to by the Ministry for the Environment. The Department of Conservation and individual regional councils and territorial authorities have made significant in kind contributions by checking the draft mapping for their areas of interest.

The Chatham Islands, which were available as part of land cover database2 on a different map projection, have not been re-mapped as part of land cover database v3.0.

Layer ID 48304
Data type Vector polygon
Feature count 431666
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

FSL North Island (all attributes)

3088
489
Updated
18 Oct 2011

This dataset was last updated on LRIS Portal on 18 Oct 2011.

The New Zealand Fundamental Soil Layer originates from a relational join of features from two databases: the New Zealand Land Resource Inventory (NZLRI), and the National Soils Database (NSD). The NZLRI is a national polygon database of physical land resource information, including a soil unit. Soil is one in an inventory of five physical factors (including rock, slope, erosion, and vegetation) delineated by physiographic polygons at approximately 1:50,000 scale. The NSD is a point database of soil physical, chemical, and mineralological characteristics for over 1500 soil profiles nationally. A relational join between the NZLRI dominant soil and derivative tables from the NSD was the means by which 14 important soil attributes were attached to the NZLRI polygons. Some if these attributes originate from exact matches with NSD records, while others derive from matches to similar soils or professional estimates.

Layer ID 48136
Data type Vector polygon
Feature count 60850
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LENZ - Mean annual solar radiation

7811
511
Added
13 Oct 2011

This dataset was first added to LRIS Portal on 13 Oct 2011.

Mean annual solar radiation data layer used in the creation of Land Environments of New Zealand (LENZ) classification. The classification layers have been made publicly available by the Ministry for the Environment (see data.mfe.govt.nz/layers/?q=LENZ for to access these layers).

Development of surfaces for annual and monthly solar radiation required substantially more data preparation than for the other climate surfaces, reflecting the small number of stations at which solar radiation has traditionally been measured.

Monthly estimates of average daily solar radiation to 1980 were available for 22 meteorological stations, but measurements of sunshine hours were available for a total of 98 stations, including 18 of the stations for which solar radiation measurements were available. To extract as much information as possible from these data, a surface was fitted first that predicted for each month the ratio of solar radiation reaching the earth's surface to that reaching the top of the atmosphere, with the latter calculated from solar geometry equations. In fitting this surface, only the 18 data points where measurements were made of both solar radiation and sunshine hours were used.

In addition to NZMG coordinates, it used as an additional predictor the ratio of measured sunshine hours for each month to the maximum possible sunshine hours given no cloud. This surface was then used to estimate the monthly solar radiation received at each of the 80 sites for which measurements of sunshine hours alone were available. Using a total of 98 sites for which solar radiation data were either measured directly or estimated from sunshine hours, surfaces predicting annual and monthly solar radiation were then fitted. Data describing monthly humidity was used as a surrogate measure of cloudiness to improve the fit of the surface to the underlying data. This also increases the local accuracy of the surface predictions, as the number of meteorological stations used to fit the humidity surface is more than three times greater than the number of sites used to fit the solar radiation surface.

The units for this layer are in MJ/m2/day, higher values signifiy areas that have higher levels of solar radiation. This layer has been multiplied by a factor of 10 (i.e. converted into an integer grid) to save space and make the grids more responsive. A value of 123 is actually 12.3 MJ/m2/day.

Additional details such as the climate station locations used in the creation of the layer and error maps are defined in the attached LENZ Technical Guide.

Layer ID 48095
Data type Grid
Resolution 25.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

FSL Soil Temperature Regime

5193
248
Added
04 Jun 2010

This dataset was first added to LRIS Portal on 04 Jun 2010.

The New Zealand Fundamental Soil Layer originates from a relational join of features from two databases: the New Zealand Land Resource Inventory (NZLRI), and the National Soils Database (NSD). The NZLRI is a national polygon database of physical land resource information, including a soil unit. Soil is one in an inventory of five physical factors (including rock, slope, erosion, and vegetation) delineated by physiographic polygons at approximately 1:50,000 scale. The NSD is a point database of soil physical, chemical, and mineralogical characteristics for over 1500 soil profiles nationally. A relational join between the NZLRI dominant soil and derivative tables from the NSD was the means by which 14 important soil attributes were attached to the NZLRI polygons. Some if these attributes originate from exact matches with NSD records, while others derive from matches to similar soils or professional estimates. The layers contains the soil temperature regime attribute. The soil temperature regime classes relate to the soil temperature at 0.3 m depth. The classes used originate from and are described more fully in Webb and Wilson (1995), which in turn is based on the work of Aldridge (1982, 1984) and Aldridge and Cook (1983).

Layer ID 48107
Data type Vector polygon
Feature count 107298
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LCDB v4.1 - Land Cover Database version 4.1, Mainland New Zealand

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24143
2315
Updated
16 Jul 2015

This dataset was last updated on LRIS Portal on 16 Jul 2015.

The New Zealand Land Cover Database (LCDB) is a multi-temporal, thematic classification of New Zealand's land cover. It contains 33 mainland classes (35 including the offshore Chatham Islands). The classification has evolved from version to version but backward compatibility has been maintained. Geographic features are described by a polygon boundary, a land cover code, and a land cover name at each of four nominal time steps; summer 1996/97, summer 2001/02, summer 2008/09, and summer 2012/13. The data set is designed to complement in theme, scale and accuracy, Land Information New Zealand’s 1:50,000 topographic database. LCDB is suitable for use in national and regional state-of-environment monitoring, forest and shrubland inventory, biodiversity assessment, trend analysis and infrastructure planning. The classification used in LCDB v4.1 is presented in the document 'LCDBClassesAtVersion4.1.pdf' and a table correlating LCDB classes over all four LCDB versions is presented in the document 'LCDBClassCorrelations.pdf'. Both of these documents are available as an attachment to this dataset in the LRIS portal (lris.scinfo.org.nz/) and on the LCDB project site (www.lcdb.scinfo.org.nz). LCDB v4.1 was released in July 2015 and includes corrections to all time steps 1996/97, 2001/02, 2008/09 and 2012/13. A description of work undertaken for this release (including that in all earlier releases) is presented in the Lineage section. Of particular note at 4.1 is the re-mapping of Chatham Islands - first mapped at version 2, but then not continued through versions 3.0, 3.3, and 4.0 because of resource constraints. “EditAuthority” and "EditDate" are attributes, maintained since version 3.0 to indicate authorship and nominal date of polygon mapping, edit or change. The data is referenced to the New Zealand Transverse Mercator 2000 projection (NZTM2000) which uses the NZ Geodetic Datum 2000 (NZGD2000). Errors in the data due to misclassification (not changes since mapping) or poor delineation can be reported to Landcare Research for inclusion in the next release using the online feedback mechanisms in lris.scinfo.org.nz/.

Layer ID 48423
Data type Vector polygon
Feature count 497833
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Potential Vegetation of New Zealand

4236
323
Added
15 Mar 2012

This dataset was first added to LRIS Portal on 15 Mar 2012.

New Zealand's potential forest composition was predicted from regressions relating the distributions of major canopy tree species to environment. Environmental variables, chosen for their correspondence to major tree physiological processes, included annual and seasonal temperature and solar radiation, soil and atmospheric water deficit, soil leaching, slope, and soil parent material and drainage. Environmental values were estimaged both for a large set of irregularly distributed plots describing forest composition, and points on a 1-km grid across New Zealand. Regressions were fitted to the ploy data species by species, with those for the four Nothofagus species also including terms to correct for the effects of their geographic disjunctions. Predictions of species abundance were then made for the grid data set, and the resulting matrix was classified to derive groups of similar composition. This data is expected to provide a context for both the assessment of the biodiversity value of surviving forest remnants and for the subsequent management and/or restoration of these sites.

Layer ID 48289
Data type Vector polygon
Feature count 233591
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 56