Smap Predicted Carbon August 2020

Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

152
3
Added
20 Sep 2020

This dataset was first added to LRIS Portal on 20 Sep 2020.

Spatial surface estimates of soil carbon stock (units tonnes per hectare) for the 0–30cm layer, over the land surface of New Zealand, based on a generalised linear regression model using environmental classification, national soil layer, and climate layers as explanatory variables, with a correction for spatial auto correlation of data samples.
A number of data layers were acquired to act as explanatory layers for the prediction of soil carbon. Soil data includes the MfE Historic Soils Database (under an agreement with MfE), the NSD (LandcareResearch New Zealand 2012), the SINDI soil quality dataset (Landcare Research New Zealand 2012), and the LMI soils dataset (under an agreement with Plant and Food Research 2011).Additional explanatory data layers were obtained from the LENZ data set (Landcare Research New Zealand), including the LENZ climate layers (e.g. mean annual rainfall) as well as environmental classification layers (LENZ level 1, 2, 3, and 4), from the Koordinates data portal (Koordinates 2012). In addition, the natural potential vegetation layer (Leathwick 2001) is used as an indicator of vegetation prior to agricultural development. These layers were augmented by explanatory layers acquired from the LRIS portal (Landcare Research 2012), consisting of national maps of basic soil properties (soil order, exchangeable calcium, acid soluble phosphorus, rock class, mid-estimate of surface outcrops, annual water deficit). Additional 0–30cm carbon stock data was obtained by using SINDI data (derived from 0–10cm depth samples) along with NSD data and a regression model to infer 0–30cm soil carbon stocks (tonnes/ha) at the centre of each pixel.

Layer ID 105005
Data type Grid
Resolution 1000.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Smap Soil Drainage Aug 2020

Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

558
63
Added
24 Aug 2020

This dataset was first added to LRIS Portal on 24 Aug 2020.

This layer is a "dissolved" representation of the soil drainage attribute for S-map previously available as a lookup table. Refer to document Smap Data Dictionary Dissolved Layers.pdf at lris.scinfo.org.nz/document/22129-smap-data-dictio...

Layer ID 104903
Data type Vector polygon
Feature count 131599
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Smap Polygons August 2020

Online
Only
Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

0
0
Added
18 Aug 2020

This dataset was first added to LRIS Portal on 18 Aug 2020.

This layer shows the coverage of S-map polygons, labelled with their Soil mapunit – a unique identifier of one or more polygons with the same soil information.
The S-map primary map layer of soil classes (i.e. delineated areas that are labelled with the soil family names) is no longer freely available to commercial users. Access to this data and associated soil attribute data for commercial use is by negotiation - contact Graeme Anderson (andersong@landcareresearch.co.nz).

ACCESS to publicly available S-map data is now at
S-map Soil Depth
S-map Soil Drainage
S-map Soil Texture
S-map NZ Soil Classification

Layer ID 104867
Data type Vector polygon
Feature count 339450
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Smap Soil Classification (Soil Order) Aug 2020

Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

540
46
Added
18 Aug 2020

This dataset was first added to LRIS Portal on 18 Aug 2020.

This layer is a "dissolved" representation of the NZSC soil order for S-map previously available as a lookup table. Refer to document Smap Data Dictionary Dissolved Layers.pdf at lris.scinfo.org.nz/document/22129-smap-data-dictio...

Layer ID 104865
Data type Vector polygon
Feature count 171858
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Smap Soil Depth Aug 2020

Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

299
9
Added
18 Aug 2020

This dataset was first added to LRIS Portal on 18 Aug 2020.

This layer is a "dissolved" representation of the soil depth attribute for S-map soils previously available as a lookup table. Refer to document Smap Data Dictionary Dissolved Layers.pdf at lris.scinfo.org.nz/document/22129-smap-data-dictio...

Layer ID 104864
Data type Vector polygon
Feature count 63821
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Smap Soil Texture Aug 2020

Licence

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

0
0
Added
18 Aug 2020

This dataset was first added to LRIS Portal on 18 Aug 2020.

This layer is a "dissolved" representation of the soil texture attribute for S-map previously available as a lookup table. Refer to document Smap Data Dictionary Dissolved Layers.pdf at lris.scinfo.org.nz/document/22129-smap-data-dictio...

Layer ID 104862
Data type Vector polygon
Feature count 79620
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LCDB_v5.0 - Land Cover Database version 5.0, Chatham Islands

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

467
30
Updated
29 Jan 2020

This dataset was last updated on LRIS Portal on 29 Jan 2020.

The New Zealand Land Cover Database (LCDB) is a multi-temporal, thematic classification of New Zealand's land cover. It identifies 33 mainland land cover classes (35 classes once the offshore Chatham Islands are included). The classification was revised between versions 1, 2, and 3 but has been consistent thereafter, and always with backward compatibility maintained. Land cover features are described by a polygon boundary, a land cover code, and a land cover name at each nominal time step; summer 1996/97, summer 2001/02, summer 2008/09, summer 2012/13, and summer 2018/19. The data set is designed to complement in theme, scale and accuracy, New Zealand’s 1:50,000 topographic database (www.linz.govt.nz/land/maps/topographic-maps/topo50...). LCDB is suitable for use in national and regional environment monitoring, forest and shrubland inventory, biodiversity assessment, trend analysis and infrastructure planning. The classification used in LCDBv5.0 is presented in the document 'LCDBClassesAtVersion5.pdf' and a table correlating LCDB classes over all versions is presented in the document 'LCDBClassCorrelations.pdf'. Both of these are among the accessory documents to this dataset in the LRIS portal (lris.scinfo.org.nz/). LCDB version 5.0 was released in January 2020 and includes corrections to all time steps 1997/97, 2001/02, 2008/09, 2012/13 and 2018/19 for both the New Zealand mainland and Chatham Islands. A description of work undertaken for this release (including that of all earlier releases) is presented in the Lineage section. Of particular note at version 5.0 is the addition to LCDB, of attributes designed to readily identify and monitor wetlands over time and a similar capability to manage significant coastal changes. “EditAuthority” and "EditDate" are attributes, maintained since version 3.0 to indicate authorship and nominal date of polygon mapping, edit or change. Errors in the data due to misclassification (rather than land cover change) or poor delineation can be reported to Landcare Research for inclusion in the next release using the online feedback facility in lris.scinfo.org.nz/.

Layer ID 104442
Data type Vector polygon
Feature count 2333
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

LCDB v5.0 Version Trace, Mainland New Zealand

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

87
12
Updated
26 Jan 2020

This dataset was last updated on LRIS Portal on 26 Jan 2020.

This data set (LCDB v5.0Version Trace) allows users to track changes back to the previous version (v4.1), and to reconcile derived quantities, such as the total area of a class in a region, to those derived from the earlier LCDB version. Additionally the authority (and date) for mapping the change is recorded in this database where such a change has been manually mapped.However sometimes when a feature has been removed, and the change area becomes part of a larger "background", the EditDate will pertain to the background area. DO NOT use this dataset to assess real vegetation change over time. Rather use the latest available LCDB version which will contain vegetation cover for all timesteps. This Version Trace dataset is only provided to help reconcile with an analysis done on an earlier version of the LCDB. Similar datasets were provided to trace LCDB2 ==> LCDB v3.0, LCDB v3.0 ==> LCDB v3.3, LCDB v3.3 ==> LCDB v4.0, and LCDB v4.0==> LCDB v4.1. Note however, we earlier called the dataset "Change" rather than "Version Trace", e.g. "LCDB v4.0 Change".

Layer ID 104441
Data type Vector polygon
Feature count 219045
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

LCDB v5.0 Version Trace, Chatham Islands, New Zealand

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

76
2
Added
24 Jan 2020

This dataset was first added to LRIS Portal on 24 Jan 2020.

This data set (LCDB v5.0Version Trace) allows users to track changes back to the previous version (v4.1), and to reconcile derived quantities, such as the total area of a class in a region, to those derived from the earlier LCDB version. Additionally the authority (and date) for mapping the change is recorded in this database where such a change has been manually mapped.However sometimes when a feature has been removed, and the change area becomes part of a larger "background", the EditDate will pertain to the background area. DO NOT use this dataset to assess real vegetation change over time. Rather use the latest available LCDB version which will contain vegetation cover for all timesteps. This Version Trace dataset is only provided to help reconcile with an analysis done on an earlier version of the LCDB. Similar datasets were provided to trace LCDB2 ==> LCDB v3.0, LCDB v3.0 ==> LCDB v3.3, LCDB v3.3 ==> LCDB v4.0, and LCDB v4.0==> LCDB v4.1. Note however, we earlier called the dataset "Change" rather than "Version Trace", e.g. "LCDB v4.0 Change".

Layer ID 104439
Data type Vector polygon
Feature count 3963
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

LCDB v5.0 - Land Cover Database version 5.0, Mainland New Zealand

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6798
904
Updated
29 Jan 2020

This dataset was last updated on LRIS Portal on 29 Jan 2020.

The New Zealand Land Cover Database (LCDB) is a multi-temporal, thematic classification of New Zealand's land cover. It identifies 33 mainland land cover classes (35 classes once the offshore Chatham Islands are included). The classification was revised between versions 1, 2, and 3 but has been consistent thereafter, and always with backward compatibility maintained. Land cover features are described by a polygon boundary, a land cover code, and a land cover name at each nominal time step; summer 1996/97, summer 2001/02, summer 2008/09, summer 2012/13, and summer 2018/19. The data set is designed to complement in theme, scale and accuracy, New Zealand’s 1:50,000 topographic database (www.linz.govt.nz/land/maps/topographic-maps/topo50...). LCDB is suitable for use in national and regional environment monitoring, forest and shrubland inventory, biodiversity assessment, trend analysis and infrastructure planning. The classification used in LCDBv5.0 is presented in the document 'LCDBClassesAtVersion5.pdf' and a table correlating LCDB classes over all versions is presented in the document 'LCDBClassCorrelations.pdf'. Both of these are among the accessory documents to this dataset in the LRIS portal (lris.scinfo.org.nz/). LCDB version 5.0 was released in January 2020 and includes corrections to all time steps 1997/97, 2001/02, 2008/09, 2012/13 and 2018/19 for both the New Zealand mainland and Chatham Islands. A description of work undertaken for this release (including that of all earlier releases) is presented in the Lineage section. Of particular note at version 5.0 is the addition to LCDB, of attributes designed to readily identify and monitor wetlands over time and a similar capability to manage significant coastal changes. “EditAuthority” and "EditDate" are attributes, maintained since version 3.0 to indicate authorship and nominal date of polygon mapping, edit or change. Errors in the data due to misclassification (rather than land cover change) or poor delineation can be reported to Landcare Research for inclusion in the next release using the online feedback facility in lris.scinfo.org.nz/.

Layer ID 104400
Data type Vector polygon
Feature count 511104
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)
Results 1 to 10 of 270